5/16" Chrome Edge Trim Molding

The 5/16" Chrome Edge Trim Molding is a flexible finishing trim designed for compatible vending machine lids and fiberglass heads.

It installs over the outer edge of the lid to cover the exposed rim and provide a clean chrome-finished appearance.

Machine selection: Select your vending machine model from the available options. The molding will be supplied in the appropriate length for the selected model.

Available lengths:

• Wiz-Kid: approximately 27 inches
• Original Wizard: approximately 33 inches
• Wonder Wizard: approximately 33 inches
• Giant Wizard: approximately 49 inches
• Mega Wizard: approximately 63 inches

Installation: Begin at one point on the lid and press the molding firmly onto the edge. Continue working gradually around the lid, making sure the trim is fully seated and is not stretched during installation.

If the molding is cold or difficult to form, allow it to warm to room temperature before installation. Gentle warming may make it easier to shape around the curved edge. Do not use an open flame or overheat the molding.

The molding is supplied slightly longer than required. Install it completely around the lid first, then mark and trim the excess material for a precise final fit.

Trim size: 5/16 inch.

Finish: Chrome.

Quantity: One continuous piece of chrome edge trim molding sized slightly longer than required for the selected vending machine.

This trim is not universal. Please select the correct vending machine model before ordering.